One of the best ways to increase home security, keep in touch with guests, and keep an eye on activities at your front door is to install a Ring doorbell. However, how to connect ring doorbell to chime so that notifications may be heard within the house is one of the most often asked topics by new users. This tutorial will help you make sure everything runs well, whether you’re integrating it with an existing system or adding it to a new configuration.
Everything will be covered in this brief guide, including setting up the device, connecting Ring Doorbell to an existing chime, troubleshooting during Login, and even how to reset Doorbell if necessary.
Things You Must Have Before Connecting Ring Doorbell To Chime
Make sure you have the following before beginning the Ring Doorbell to Chime connection process:
- A Ring doorbell gadget that is compatible
- Current chime and doorbell wiring (for wired systems)
- The Ring app that is loaded on your mobile device
- A reliable Wi-Fi connection
- Login access to your Ring account
Let’s Go Through The Process To Connect Ring Doorbell To Existing Chime
1. Log in to Ring
Ring login is the first step in the process of connecting your Ring Doorbell to Chime. This is how you go about it:
- On your smartphone, launch the Ring app.
- Pass in your keyword and listed phone number or email address.
- To access your Ring Dashboard, tap “Log In.”
- By selecting “Create Account,” you may register for a new Ring account if you haven’t done so already.
- You will be sent to the Ring Doorbell configuration page subsequently logging in.
2. Start the Ring doorbell configuration
It’s time to set up your Ring doorbell when you’ve finished logging in:
- On the app, tap the “Set Up a Device” button.
- From the device list, choose “Doorbells.”
- Scan the QR code that is on the Ring device’s back.
- To connect to your home WiFi network, trail the in-app guidelines.
The software will ask you to set up notifications and connect your device to existing hardware, such as your home’s chime system, when your device has been linked to Wi-Fi.
3. Connect ring doorbell to chime which existing
The crucial step is now to connect ring doorbell to chime that is existing. Whether you are utilizing a wireless Ring Chime accessory or a cable chime will affect this step.
A. Concerning Wired Systems
Before working with wires, turn off the voltage at breaker.
- Determine which wires are attached to your chime by removing the current doorbell.
- As instructed in the in-app tutorial, connect the wires to the Ring Doorbell’s terminals.
- Secure the gadget and fasten the mounting bracket.
- Restart the power and finish the setup.
- The app will automatically check for wiring issues and make sure the chime is connected correctly.
B. Concerning Wireless Systems
Ring has a Ring Chime attachment that connects over Wi-Fi if you don’t have any wire or don’t want to tamper with it.
- Get the Ring Chime and connect it into a power socket close to your network.
- Choose “Chimes” after tapping “Set Up a Device” in the Ring app.
- Connect the gadget to your Wi-Fi by following the instructions.
- In the setup phase, connect ring doorbell to chime.
- In this manner, the wireless chime will notify you each time the doorbell rings.
4. Verify the Link
Press the doorbell button to test the system after the device has been successfully linked. The chime should be audible either through the app’s notification sound or within the house.
If it doesn’t function right away, make sure that:
- The doorbell is switched on and placed correctly.
- For wired configurations, the wiring is connected appropriately.
- The Wi-Fi signal is reliable and powerful.
- An audible level is selected for the chime loudness.
5. Troubleshoot and, if need, reset ring doorbell
- Problems can occasionally occur during connection or setup. Resetting the Ring Doorbell could be required if you’re having trouble connecting it to Chime.
Resetting a Ring doorbell: A Guide
- Find the reset button, which is often located on the device’s rear.
- Hold it down for approximately 15 seconds.
- Wait for the light to flash after releasing the button.
- Repeat the Ring Doorbell setup process from the start.
- Resetting can fix software bugs, pairing problems, and connection problems.
Advice for a Smooth Run
- Make sure your chime is compatible with the Ring doorbell model at all times.
- Validate that the Wi-Fi signal is strong enough; you might want to use a range extender or move your router.
- For best results, keep the Ring app updated to the fresh version.
- Before attempting installation, get advice from an electrician if you have any questions regarding wiring.
- If your Ring gadget is battery-powered, make sure to check its battery level on a regular basis.
In Conclusion
To make sure you never miss an alert or guest, you must learn how to connect ring doorbell to chime. The Ring app walks you through Login, setup, and troubleshooting stages, including how to reset Doorbell if necessary. The process is simple whether you’re connecting Ring Doorbell to an existing chime or utilizing a wireless option.
FAQS:-
1. Can I connect multiple Ring Doorbells to one Chime?
It is possible to connect more than one Ring doorbell to a single Ring chime. Nevertheless, the chime sound will be the same for both doorbells; tone modification for each doorbell is not supported.
2. Do I need Wi-Fi to connect Ring Doorbell to Chime?
Yes, in order to work effectively, Chime and Ring Doorbell both need an online connection. Chime won’t get doorbell notifications if there is no internet connection.
3. Will the Ring Chime work with all Ring Doorbell models?
The Ring Chime is compatible with the majority of Ring doorbells. But the Ring Video Doorbell Wired doesn’t trigger the mechanical chimes that are already there; instead, it employs a jumper to get around internal chimes.
4. Is Ring Chime different from Chime Pro?
Indeed, the Chime Pro offers enhanced connection and dual-band compatibility for Ring devices, acting as both a chime and a Wi-Fi extender.
5. Can I adjust the Chime sound and volume?
Yes, by going to Devices > [Your Chime] > Audio Settings > Chime Tones in the Ring app, you may choose multiple chime tones and change the loudness.
